Camera rinsing feature
To remove milling dust and dirt from the camera view, you must clean it carefully using water every so often. Unlike cleaning using compressed air or wiper blades, this does not cause any scratches on the surface of the camera lens. There are two different systems to supply water to the robots.
The pumps for cleaning the camera are each available as 12V or 24V versions.
Camera rinsing feature for permanent installation
If an existing water tank is to be used in the vehicle, a set of pumps is installed as a permanent fixture. Connected to the relay box for the digital controls, the pump is controlled via the button on the joystick unit.
Mobile camera rinsing installation
A set of pumps mounted on a portable frame including a 20-liter water tank to connect via the existing vehicle sockets. Connected to the relay box for the digital controls, the pump is controlled via the button on the joystick unit.