- Products > Robot tools + Accessories > Air motors + Extensions > Air motor 750 W
Air motor 750 W
An air motor specially developed for use in the sewer for the renovation milling robot Talpa FSR 1330 with M14 connection thread for mounting the most varied attachments.
Can also be used in the tool holder of the Talpa FSR 2060 if a shorter motor with a lower height than the Air motor 800 W is required.
Performance Data Air Motor 750 W
- Housing cylinder Ø 59 mm
- 750 W power consumption
- 13,000 rpm idle speed
- 6,500 rpm on-load speed
- 1,200 l/min air consumption
- 1.1 Nm load torque
- 1.7 Nm stall torque
- 1.4 kg weight
Key figures refer to 6 bar operating pressure.
Exhaust air guide
The exhaust air guide supplied with the robot directs the contaminated exhaust air from the milling motor upward to keep the camera clean.
Backward compatibility
The air motors have a diameter of 59 mm and, together with a separately available angle kit and air hose, can also be used on robot models built before 2023. For Talpa models with a Ø 69 mm tool holder, an adapter ring is available.