You are here: 

Typ MiNa

MiNa is a color camera with a high-resolution CCD sensor.
It provides high-definition images and was developed especially for tough deployment in the sewer.
The compact housing has passive pressure monitoring at 0.2 bar overpressure.

TECHNICAL DATA

Camera MiNa (PAL or NTSC)

SensorSONY Super HAD CCD II
Resolution750 TV lines
FocusManual
LightingLED technology
Pivot function+/- 135° (backward view), wear-free sliding clutch
WaterproofPassive pressure monitoring at 0.2 bar; LED control indicator
Switch camera principleInstallation on the robot in just a few steps
PRESSURE MONITORING

The interior space of the camera is filled with air and subject to an overpressure of 0.2 - 0.3 bar. When switching on the camera, a self-test of the pressure display is carried out (red and green lights flash alternately). After approx. 5 seconds, the display is ready for operation and the actual pressure is displayed.

Red lights upPressure is low
Green flashesDrop in pressure
Green lights upWorking pressure
Green + red flashPreset pressure
Red flashesPressure is too high

If red (lit up) or green (flashing), the air must be topped up.

Optional accessories
Hand pump with pressure gage
To prevent the penetration of water, the robots and cameras are subject to overpressure. The hand pump with pressure gage can be used to control or adjust this.
> View product
Camera elevation for Talpa FSR 1330
Die Kameraerhöhung erhöht die Position der angeschlossenen Kamera auf den Fräsroboter Talpa FSR 1330 für einen besseren Blick auf das Hutgummi an dem angekoppelten HutlinerPacker®.
> View product
Camera extension for Talpa FSR 2060
The camera extension raises the position of the connected camera on the milling robot Talpa FSR 2060 for a better view of the rubber hat on the coupled HutlinerPacker®.
> View product